Address: Wollongong NSW
Mould and Coastal Damp: How We Treat It Before We Paint
Why you cannot just paint over mould on Illawarra homes, and the wash, dry, repair and prime process we use before any topcoat goes on.
Walk around enough Illawarra homes and you see the same thing: black or green freckling on the south side of the house, under the eaves, along the bottom of the fence, in the corner of a bedroom that never gets the sun. People ask us if they can just paint over it. From our experience, the answer is no, and the ones who try usually call us back within a year or two.
Why mould loves this part of the coast
Between the escarpment holding in damp air, sea air carrying salt, and shaded south-facing walls that stay wet long after the rain stops, a lot of homes from Thirroul down to Shellharbour have the perfect conditions. Older fibro, weatherboard and rendered walls hold moisture, and a tired paint film gives the spores something to grip.
Why painting straight over it fails
Mould sits on and in the surface. If you roll paint over it, you’ve sealed a living thing under a coating. It grows through, shows as shadowing or spots, and the paint starts to lift. It’ll never go back to a hundred percent if the surface underneath wasn’t treated first. That’s the part that gets skipped when someone is trying to save a few hundred dollars on prep.
How we treat it before we paint
- Find the cause. A blocked gutter, a leaking downpipe, garden beds piled against the wall or a roof leak will bring mould back no matter what paint goes on. We point these out before quoting.
- Wash and treat. We clean the surface with a mould-killing wash, work it in, and leave it for the dwell time on the product label. Then we rinse thoroughly.
- Let it dry. Coastal walls can take a few dry days. We don’t coat damp surfaces, and a good painter will tell you when to wait.
- Repair and prime. Cracks, flaking and bare patches are repaired and spot primed with a sealer suited to the surface.
- Topcoat. We then apply a quality exterior paint, or in bathrooms and laundries a mould-resistant interior finish, to give the surface the best chance to stay clean.
Inside the house
Bathrooms, laundries and bedroom corners with poor airflow are the usual spots. Treat the patch, fix the ventilation (an exhaust fan that actually vents outside makes a bigger difference than any paint), and use a bathroom-grade paint. If it keeps coming back or the plaster is soft, it’s a moisture problem and you need a builder or plumber, not a painter, and we’ll tell you so honestly.
What paint won’t do
No paint is mould-proof forever. A good product slows regrowth, but shaded south-side walls will still need an occasional wash. A light clean every year or so keeps the coating going much longer.
Getting it done properly
If you’re seeing mould or damp patches on your home, have a look at our guide to paint for coastal salt-air homes and why prep is 80 percent of a good paint job. For a home-by-home assessment, see our exterior painting services and interior painters, or get in touch for a free quote or call us on 0421 755 294.

